the basic solution for solar-assisted, mobile charging of batteries up to max. 200Ah:
in the camping area
for vehicles and boats without fixed solar installation
and numerous other applications in a wide variety of areas
easy to set up thanks to 3 firmly integrated feet
Three feet are firmly attached to the bag of the FSP, which can easily be folded out to place the panel on the floor at 45 degrees. So the module is fully assembled and ready for use within one minute.
the included Profi-Connection Kit
The connection kit included in the scope of delivery offers everything you need to quickly commission the mobile solar set. Each FSP-2 has a 4.5m connection cable with a high-quality Anderson connector at the end. A second 0.5m connection cable is supplied, which is screwed directly to the solar input of the charge controller and is also equipped with an Anderson plug on the other side. This allows you to quickly connect or disconnect the controller via the Anderson connectors at any time without having to unscrew the cables from the charge controller.
For connecting the charge controller to your battery, a 1 meter Plug & Play connection cable is also included. This is screwed to the battery input of the regulator and is equipped on the battery side with universally applicable crocodile clamps, which can be connected compatibly to all current battery terminals comfortably. In addition, the battery cable has a flat fuse holder with corresponding ATO fuse.
|system voltage||12 V|
|Generating capacity (Wp)||120 Wp|
|Module voltage (Vmp)||20,88 V|
|max. current (Imp)||5,74 A|
|Open circuit voltage (Voc)||24,64 V|
|Short-circuit current (Isc)||´6,2 A|
|temperature coefficient||-045% /°C|
|solar cell type||SPR monocrystalline high-performance cells (original Sunpower)|
|Length of pre-installed cables||4m / 4,5m|
|Pre-assembled connectors||Anderson Connectors|
|Dimensions(LxBxH)||56 x 44 x 6 cm|